CHINA ACME LASER
The hand-held welding head is flexible and convenient for outdoor welding.
The operating mode of the hand torch allows the work-pieces to be welded at any angle from any location.
Intelligent switching of dual light paths, evenly distributing energy according to different time and different light.
Suitable for spot welding of various complex welded joints and various equipment.
Details of Machine
Advantages of our machines
It is easy to operate and can be welded by hand. No need to cost much money to hire a welding master .
Suitable for small-scale production. Hand-held laser welding machines have lower production compliance rates than fully automated equipment deployments. However, for the production workshops engaged in small-scale processing or non-large-scale welding, manual laser welding is the best choice. There is no need to set up equipment to deploy the welding station, which takes up little space. The important point is that the welding products of small workshops are diversified and the shape of the products is flexible. Manual laser welding can fully meet the needs of this production, and the compliance is better.
Low maintenance cost. Hand-held laser welding, no need good soldering station, low material cost, low energy consumption, low equipment deployment and maintenance costs. In the same working environment, we need to spend a lot of time to maintain the soldering station, but as long as there is a hand-held laser welding machine in the manual laser setting equipment deployment, we can use to weld. As for replacement, the cost of replacing parts is low too.
|Cabinet||Hand-held fiber laser welding cabinet||Set||1|
|Laser source||IPG/RAYCUS/MAX 500W-2000W||Set||1|
|Welder head||120°Ergonomic hand solder joint||Set||1|
|Water cooling machine||1.5P Dual cooling||Set||1|
|Laser control system||Touch screen||Set||1|
|Hand-held safety controller||Prevent accidental light||Set||1|
|Output laser stability||≤3%|
|Laser source lifetime||≤100 Thousand hours|
|Optimal operating environment||Temperature:0-40ºC, Humidity: 20%-80%|
|Electricity demand||AC380 50-60Hz,20A|
|Cooling mode||Water cooling|
|Continuous operation time||24 Hours|
|Output fiber length||12M (Can be customized)|
|Appearance size||About 60cm*104cm*120cm|
|Laser safety level||Class IV|
|System protection registration||IP|
|Adjustable power range||10-100%|
|Suitable for welding all kind of advertising letter ,lightings and mould industrial ,optoelectronic communication devices ,medical ,electronics ,copper parts ,metal welding processing industries .|
|Electronic Components:||Resistors, Capacitors, Chips, Printed Circuit Boards, Computer Keyboard, etc.|
|Mechanical Parts:||Bearings, Gears, Standard Parts, Motor, etc.|
|Instrument:||Panel Board, Nameplates, Precision equipment, etc.|
|Hardware Tools:||Knives, Tools, Measuring Tools, Cutting Tools, etc.|
|Automobile Parts:||Pistons and Rings, Gears, Shafts, Bearings, Clutch, Lights, etc.|
|Daily Necessities:||Handicrafts, Zipper, Key Holder, Sanitary Ware, etc.|
Ordinary welding head VS Swing welded joint head
l Swing head can obtain a wider weld than the ordinary head, which can reduce the requirement of the hand welding for the worker.
l Swing head adopts a high-speed rotation mechanism to achieve material agitation, achieve the effect of stirring welding, and can be compatible with a larger gap than a common head.
l As for Welded aluminum alloy etc.,Swing heads have an unparalleled advantage over ordinary heads.Common head is compatible with a gap having a gap smaller than the thickness of the material to be welded by 1/5. But Swing head can be compatible with a gap having a gap smaller than 1/3 of the thickness of the material to be welded.
|Mild-steel /Carbon steel||≤1.0mm||≤1.2mm||≤3.0mm||≤4.0mm|