LT-6020E Automatic Loading Pipe Fiber Laser Cutting Machine
1. Economic design for those who have needs for automatic loading
2. Stronger bed based on our basic model
3. Pneumatic Chucks for easier clamping
4. Unique back chuck tail droping sytem
5. For max 160mm pipe automatic loading, bigger diameter customized
6. Three sets of unloading psrt for more possibilites
4. Tail dropping at back of machine
5. Material Unloading
Six pcs of pneumatic carrier,suitable for 20-160mm different types of pipe diameter to ensure the longer size of the pipe clamp accuracy due to its flexing. Redesigned by Acme Laser.For unloading part, there are 3 sets of pneumatic carrier.
Standard length 6m .
Loading diameter of the tube from 20 to 150mm,
Tube type : round ,oval,square, Rectangular tube
For long term stable work of the machine, we have requirements for the following water, electricity, gas, work environment, foundation, processing materials.
|1||Power||Laser||8kVA||Total capacity no less than 40KVA.|
|3 phase voltage stability||380v±5%|
|Unbalanced three-phase power supply||less than 2.5%|
|Grounding||less than 4 Ohm|
|2||Water||Water Chiller||deionized water|
|3||Gas||Cutting gas||N2>99.99%||Different materials, different specifications|
|4||Working environment||Temperature||5-40 degrees||Laser source installed in air conditioning room|
|Humidity||less than 70%|
|Foundation||No earthquake source nearby||Earthquake-proof ditch for seismic Foundation|
|5||Material||without rust in accordance with ISO or GB|