Fiber laser cutting machine how to use and maintenance methods

- Nov 28, 2017 -

Fiber laser cutting machine how to use and maintenance methods:

1) regular inspection of steel, must ensure that tightened. Otherwise, there is a problem in operation, there is a possibility that people will be injured, and serious deaths will also result. Strip looks like a small thing, the problem is still a little serious.


2) Every six months check the straightness of the track and the verticality of the machine, found abnormal and timely maintenance and debugging. Did not do this, it is possible to cut out the effect is not very good, the error will increase, affecting the cutting quality. This is a top priority and must be done.


3) once a week with a vacuum cleaner suction machine dust and dirt inside, all electrical cabinets should be closed strict dust.


4) The guide rails should be cleaned regularly to remove dust and other debris to ensure that equipment should be regularly cleaned rack, add lubricating oil, to ensure lubrication without debris. The guide rail should be frequently cleaned and lubricated, and the motor must also be cleaned and lubricated frequently. The machine can move better when it travels. The cutting is more accurate and the quality of the cut product is improved .


5) dual focal length laser cutting head is a fragile item on the laser cutting machine, long-term use, leading to laser cutting head damage.


To regularly check and repair. If there is deformation or other forms of appearance, then you should know that the laser cutting head has been a bit damaged, to be replaced. Without replacement will affect the cutting quality, increase costs, and some products may also be secondary processing, reduce production efficiency. Laser cutting head to find a professional manufacturer of production, when the purchase should be carefully checked, so as to avoid problems when the use of time.