ACME 6m Fiber Laser Cutting Tube/Pipe Machine
Parameters
Laser Type | Fiber Laser |
Laser Power & source | 1000W to 15000W IPG/RAYCUS/MAX. |
Cutting Area | Any dimension is ok |
Max. Travel Speed | 120m/min |
Max. accelerated speed | 1.5G |
Drawing Format | DXF. CAD etc. |
Details
RAYTOOL Laser Head
RAYCUS LASER SOURCE
Pneumatic Chuck
Sample
FAQ
Q1. How to reduce the loss of fiber laser cutting machine?
A1. Fill the screws with a little lubricating oil, including the screws on the laser tube support and the first reflector, which can be easily disassembled during maintenance. Note: Do not add lubricating oil to timing belts, energy chains, air pipes, motors, sensors and lenses, wires.
A2. No items can be placed in the machine to avoid unnecessary damage to the machine.
A3. Clean the dust and foreign objects on the metal oil tanker, metal shaft, slider and linear guide rail with cotton cloth, add lubricating oil, and carry out the reciprocating movement in empty line.
Q2. How to reduce the heating of the servo motor?
A1. Assuming that the servo motor driver has an automatic half-flow mode, try to make it work in a half-flow state, because the motor servo motor full-flow operation generates a large amount of heat at this time.
A2. Assuming that the load torque range allows, the rated current of the motor can be reduced, such as 5A motor, let it work in 4A state, choose low resistance, low current motor servo motor, reduce copper loss and iron loss.
