LP-1550S Coil Feed Fiber Laser Cutting Plate Machine
Coil Feeding and leveling
Laser Cutting Part
Finished cutting unloading part
Q. How to protection laser equipment in summer?
Laser Source protection
Water tank auxiliary cooling
During the daily use of the laser, a water tank is needed for auxiliary cooling. If it is not protected, condensate water is likely to appear inside the laser, causing damage to internal electrical components or modules. In the hot summer, we usually set the cooling water temperature to 24 ℃.
Air conditioning room assisted cooling and dehumidification
The summer is very hot and humid, we need to configure an air-conditioned room for the laser source, and it is recommended to set the temperature between 22 ℃-26 ℃. Keep empty every day after work, set the dehumidification function.
Water Chiller Protection
The air inlet of the water tank is on the side, and the air outlet is on the top. (The air outlet of some water tanks is on the side, and the air inlet is in front.) When the air inlet is full of dust, it will affect the heat dissipation of the water tank, causing a high temperature alarm of the water tank. Therefore, we must pay attention to ensuring the ventilation and ventilation around the water tank, without placing shelters and doing a good job of cleaning.
Electrical Cabinet Protection
Do regular maintenance of the electric cabinet air conditioner on the side of the electric cabinet, pay attention to clean the condensate collection box and dust net dust.
The heat dissipation filter assembly needs to be cleaned regularly of filter cotton dust. When cleaning, use a flat-blade screwdriver to disassemble the outer layer and remove the cotton to clean it.